Briefly describe the components of stainless steel pipe fittings

Sep 04, 2020

Leave a message

(1) The performance of carbon steel mainly depends on the carbon content. As the carbon content in the steel increases, the strength and hardness of the steel increase, and the ductility and toughness decrease.

(2) The mass fraction of silicon in cast steel is 0.2%-0.45%, and this content range has little effect on the mechanical properties. Silicon needs to have a certain content to ensure the deoxidation of steel. Therefore, silicon is a beneficial element in steel.

(3) Sulfur is a harmful element in steel, mainly in the form of iron. It forms a eutectic with iron and has a melting point of 989 degrees, which is much lower than the melting point of steel. During the solidification of steel, sulfides often precipitate at the grain boundaries of steel. Due to the low strength and brittleness of steel, the mechanical properties of steel are greatly reduced, and thermal brittleness is likely to occur at high temperatures. If the molten steel does not deoxidize and contains more FEC, the sulfide forms a ternary eutectic with iron and Fe, and the melting point is lower (about 940 degrees) and the harm is greater. Sulfur also has an adverse effect on the weldability of steel. Therefore, sulfur should be removed as much as possible in the steelmaking process.

(4) The mass fraction of manganese and manganese in cast stainless steel pipe fittings is 0.5% to 0.8%, and its role is to deoxidize and desulfurize.

(5) Phosphorus is also a harmful impurity in steel. It is better to be as small as possible, and the quality score is required to be less than 0.06%.


Send Inquiry